Can be used in Senior and Junior categories (just remove the front brakes for Jun).
The kart includes a set of magnesium OTK wheels.
The kart is stored at the Stratos Motorsports workshop in Bandar Saujana Putra.
Price:
With Unipro 6003: RM16,000. (Unipro incl Exhaust temp, rpm, water temp sensors, over 4k retail price)
Without Unipro: RM13,500
Without Front Brakes and Unipro: RM12,500
Call James Russell at +60176902295 for more info, to purchase the kart, or to set a time to view it in Bdr Saujana Putra.
Email: james@stratos-motorsports.com
The retail price for this kart in Malaysia is RM19,500. Don't delay, the kart is sure to go fast!
Special Coaching Offer:
Take the kart (with Rotax engine) out for a 1-day test drive at Sepang karting circuit with coaching from Rotax Malaysia and Asia champion Mikko Nassi (
), at a price of RM1,500, and if you decide to buy the kart, you get RM1,000 discount off the price listed above. Coaching program includes data and video analysis after each session, and at least 6 on-track sessions. This way you get to try the kart before you buy it, and learn how to get the best out of it!Pictures of the actual kart:
Kosmic Sticker kit is under the Stratos Stickers.
Front Brake
Rear Brake
Unipro 6003
Very light wear on the underside of the frame.
Homologation and Serial number.
Picture from Kosmic website showing Kosmic sticker kit:
Chassis description on Kosmic Website:
Homologation CIK/FIA 49/CH/14
MERCURY MY13 is composed by a frame realized with Ø 30 mm tubes in molybdenum chrome steel, adjustable in height both front and rear. It is supplied with two torsion bars which allow to modify the rigidity of the chassis. The adjustment of camber and caster is easily changeable thanks to the incorporated uniball eccentric washers. Racing is the version chosen for this model, at top of the range, and it is provided with magnesium OTK components. The brake system can be chosen among the BS5 – SA2 – SA3 according to the category in which is used. MERCURY MY 13 is equipped with the new OTK adjustable pedals in forged aluminium and with the new floor plate and the new 2013 model fuel tank. The chassis has OTK M4 bodyworks, studied and tested in order to reduce the coefficient of aerodynamic resistance and they are complete with stickers.
